NEW AND USED GRANDFATHER CLOCKS simon@grandfatherclocks-simonowen.com Telephone 07817487233

Grandfather/Grandmother Clocks

To see more images of the clocks, please click on the images below to view the clocks over at Ebay!



Grandfather Clock

Manufactured by SLIGH in USA.   The clock is fitted with a German Hermle Westminster chime movement which can be manually silenced at any time by adjusting the lever adjacent to numeral 3.  The movement is weight driven on cables and wound by using an heavy duty crank key.    


The clock cabinet is in excellent used condition throughout - I believe it was manufactured in the year 2000 so its about 26 years of age and has seen by the pictures uploaded, has been very well cared for. 


The brass weights and brass lyre pendulum are all in excellent condition.  The ornate brass dial is also in great condition but does have some light scratches here and there and around one of the cranking holes.  This is a very common occurance on this type of clock, caused by the misalignmengt of the crank key when rewinding!  


The clock has been constructed mainly from solid oak, then finished in a shade of medium oak.


Access to the movement is easily obtained by removing the glass side panels that are located in the upper section of the clock.  This makes for easy access of the movement eg for resetting the beat should the clock ever be knocked out of beat.


The mechanical movement will be professionally serviced before sale - please allow enough time for this work to be completed.


A video has been added to the listing which I hope is clear enough for you to see and hear the clock chiming and striking away.  The videos on ebay only allow about 1 minute of 'quality' filming - anything over that time normally results in poorer quality!   Please let me know if you would like a better quality video of the clock.


Dimensions:  83.25 inches high x 20.25 inches wide x 12 inches deep.

(Where measurements taken width and depth , are where the clock meets the floor)

PLEASE CLICK ON THE IMAGE TO VIEW THE CLOCK AND FURTHER INFORMATION, OVER AT EBAY.  


PRICE £895


Grandfather Clock


Manufactured by Richard Broad / approximately 50 + years of age


The clock is fitted with a Kieninger Westminster Chime movement.  The chimes can be manually silenced at any time by using small pushrods that are located in the waist of the clock.


The movement is weight driven on chains and wound by pulling the chains downwards. 


The movement will be professionally serviced before sale - please allow enough time for this work to be completed.


The clock is in very good used condition.  The clock case does have a few age related imperfections here and there, nothing significant ... nothing more than what you would expect from an ijtem over 50 years of age.  Hopefully the pictures show the clock clearly.  

I can do a more detailed video of the clock if you require that.  The ebay video only allows about a minute of clear filming.  If that time is exceeded, the videos are very poor quality!  However, I hope that the video uploaded allows the potential buyer to hear the excellent quality of the Westminster chime and houly strike.  Very deep and mellow chime!


The clock has been contructed from a mix of solid walnut and walnut finish. Typically, the doors and decorative features are solid timber. 


The brass moon dial is in good good condition.  There are imperfections on the dial which I have tried to picture.  The worst of these imperfections are along the lower section of the dial where the hood of the clock meets the dial;  these imperfections are not visible when the hood of the clock is fitted in place.  The hood easily slides into place for easy access of the mechanical movement.   I have uploaded a picture of the clock without the hood in place.  If you zoom in you will see the area of the dial where the hood has made contact with the dial.  

As mentioned this area is not visible when the hood is positioned in place.

The brass weights do have some mild soiling and imperfections but can be positioned on the chains such that these imperfections are hard to notice.  I have uploaded a picture of the 3 brass weights.

And likewise, as above, the brass pendulum disc.


Dimensions:  76.5 inches high x  20.75 inches wide x  10.25 inches deep 
(Where width/depth are parts of clock that meet floor)
PLEASE CLICK ON THE IMAGE TO VIEW THE CLOCK AND FURTHER INFORMATION, OVER AT EBAY.  

Price £495

Grandmother Clock

Manufactured by Fenclocks of Suffolk, the clock is fitted with a German Hermle triple chime movement and comes with a choice of St Michael, Whittington and Westminster Chimes.  The movement is weight driven on chains and wound by pulling the chains downwards.    There is also the option to manually silence the chimes at any time.  All selections are achieved by simply adjusting the small lever that locates through the dial positioned next to numeral 3.  

Also, the clock comes with the much sought after auto night silence feature which when set, silences from 21:45 and restart 7am.

 The clock is in excellent used condition throughout, nearest to new you will find!  The clock is about 25 years of age and has been very well cared for by the previous owners.  The pictures clearly show the quality of this clock which looks and sounds superb!


The clock has been constructed from a mix of solid oak/ oak finish, then finished in a shade of medium oak.


The brass moon phase dial, brass weights and brass lyre pendulum are all in excellent condition.


Access to the movement is easily achieved by lifting the hood of the clock upwards and away from the main body of the clock case.  This makes for easy access to the movement Eg., to adjust the beat of the clock or simply view the movement chiming and striking away.  


The mechanical movement has been professionally serviced and the clock is ready to go - I'm just regulating it for accuracy of time keeping.  


A video has been added to the listing which I hope is clear enough for you to see and hear the clock chiming and striking away.  The videos only allows about 1 minute of 'quality' filming - anything over that time normally results in poorer quality!   Please let me know if you would like a better quality video of the clock. 


Dimensions:  70.75 inches high x 15 inches wide x 8.75 inches deep.

(Where measurements taken width and depth , are where the clock meets the floor)


PLEASE CLICK ON THE IMAGE TO VIEW THE CLOCK AND FURTHER INFORMATION, OVER AT EBAY.  


  Price £795

Grandfather Clock


Manufactured by Interclock of Belgium / approximately 50+ years of age

The clock has been fitted with a brand new Hermle Westminster Chime movement.  The chimes can be manually silenced at any time using a lever that locates through the dial at position 3. 

The movement is weight driven on chains and wound by pulling the chains downwards. 

The clock is in excellent used condition throughout with just the odd imperfection here and there, nothing worth noting - extremely good throughout!  I am unsure what the timber is - could be oak, however, it has been manufactured from mainly solid timber.  It has panelled sides with a very noticeable grain pattern which I have tried to picture.  Please zoom in and hopefully you will see the grain pattern very clearly.  Personally I think this is a very unique feature and gives the clock lots of character.  The top side panels are removable to gain access to the movement.  Eg., to view the movement chiming and striking away or to put the clock back into beat if the need ever arises!  

It has three opening doors all held firmly closed with handles that turn through 90 degrees.

The three brass heavy weights are in good condition but the brass weight shells do have a few scuff marks/light scratches caused by years of handling to rewind the clock.. the brass lyre pendulum is also in good condition with a few light surface imperfections.

The original dial was severely damaged many years ago so I have fitted a traditional brass tempus fugit dial which is in excellent condition.  It has the logo 'fenclocks' on the dial, but the dial just looks so good in this clock and a very close match to the original dial.

This clock looks and sounds superb and the buyer will not be disappointed.  A great quality clock at a bargain price!

Dimensions:  82.5 inches high x  18.5 inches wide x  11.5 inches deep 

(Where width and depth are parts of clock that meet the floor)


PLEASE CLICK ON THE IMAGE TO VIEW THE CLOCK AND FURTHER INFORMATION, OVER AT EBAY.  


  Price £595


Grandfather Clock

Made by Interclock of Belgium / approximately 35  years ago.

The clock is fitted with a Kieninger Westminster Chime movement.  The chimes can be manually silenced at any time by adjusting the levers next to numeral 9 and numeral 3.  

The clock also comes with the autonight silence feature which if selected, silences the chimes from 10pm and restarts at 7:15am.

A fantastic quality clock at a bargain price!


Dimensions:  77.5 inches high x  17.25 inches wide x  9.5 inches deep

(Where width and depth are parts of clock that meet the floor)

(Please be aware to undertake any deliveries from 23rd March - mid/late April)

ALL clocks are delivered personally nationwide and professionally installed/ set-up in the buyers home.  If you would like a quote for delivery, please forward your postcode;  I cover most of the UK mainland.  I only charge for fuel costs only, allowing £30 per 100 miles.

(Any questions please ask) 

 

PLEASE CLICK ON THE IMAGE AND VIEW THE CLOCK /FURTHER INFORMATION, OVER AT EBAY.


Price £595



Grandfather Clock

*Manufactured by Denclocks / approximately 50 + years of age


*The clock is fitted with an Hermle Westminster Chime movement.  The chimes can be manually silenced at any time using a small pushrod that is located in the waist of the clock.


*The movement is weight driven on chains and wound by pulling the chains downwards. 


The movement has been professionally serviced and the clock is ready for delivery!


*A fantastic quality clock at a bargain price!


(Please be aware to undertake any deliveries from 23rd March - mid/late April)


Dimensions:  79.75 inches high x  16.75 inches wide x  8.75 inches deep 

(To follow, but height about 79 inches, will confirm)


(Where width and depth are parts of clock that meet the floor)


Clocks personally delivered nationwide- clocks professionally installed and set-up in the buyers home.  If you would like a quote for delivery, please forward your postcode;  I cover most of the UK mainland.  I only charge for fuel costs only, allowing £30 per 100 miles.

Any questions please ask.  


PLEASE CLICK ON THE IMAGE AND VIEW THE CLOCK /FURTHER INFORMATION OVER AT EBAY.


Price £495